Desktop Course Training Modules

MODULE : I

COMPUTER BASIC HARDWARE

  • Basics Of Electronics (AC,dc, volt ampere, multi meter used, measurement)

  • Fundamentals Of Computer( Definition,generation, classification, anatomy, input, output)

  • Computer Assemble & Parts Identify (smps, cabinet, board, storage, cpu, board)

  • Smps: ( types, pin detail, 12v, 5v, 3.3v pson, pgood, standby)

  • Motherboard Cpu (types, block diagram, chip identify, north, south , io, lan, vga, agp etc)

  • Hard Disk Cd/Dvd (STATA, PATA, size type, internal parts, spindle, motor , head ,vcm)

  • Monitor /Lcd /Led ( working idea of lcd, basic problems of lcd, moniter)

  • Ram: ( types of RAM , DDR1, DDR2, DDR3 , DDR4 , different volt)

  • Types Of Cards (agp, graphics,, lan, vga , usb)

  • Basic Operating System: (types, single , multi user, booting process, bios setting)

  • Installing OS Drivers( format, windows installation, driver installation)

  • Windows Operating Systems (basic used, device manager, control panel, dos cmd, config)

  • Virus, Antivirus, Internet, Settings (antivirus software, internet connection, use of internet)

  • Troubleshooting Of Computers ( msconfig, repair, NTLR missing, file missing)

  • Basic Networking Concept: (types of network ,cabling, cripting, ip address, subnetting, sharting files, printer)

MODULE : II

BASIC ELECTRONICS ANALOG, DIGITAL, PRACTICE

Desktop service training institute

  • AC, DC, Electronics, (Electrical, Current, Voltage, Watt, Ampere, Types Of Circuit, Measure.)

  • Types of Material, Working Detail of Circuit, Different Components.

  • Resistor: Types, Uses, SMD, Measure, Value.

  • Capacitor: Work, Types, Ceramic, Electrolyte, Tentalium.

  • Induction / Coil: Work, Types, Check.

  • Transformer: Work, Types, Step Up, Step Down, SMD, Checks.

  • Diode: Semiconductor, N Type, P Type, Work, Types, Testing.

  • Transistor: Work, Types, NPN, PNP, Testing Method, Uses.

  • FET, MOSFET: Work, Types, NPN, PNP, Testing, Single Channel, Dual Channel, Testing, Uses.

  • Other Components: Fuse, Crystal, RTC.

  • Digital Electronics, Types of Number Systems, Conversion.

  • Types Of Logic Gate: AND, OR NOT NOR, NAND, Flip Flop, Exclusive.

  • Study of Different Chip Datasheet with Different Gates and Working Idea of Different Chips.

  • Soldering, Removing, Cold Testing, Warm Testing, Procedure of Components.

  • Project on Electronics, practical Idea of Using Different Components. Resistor, Capacitor Diode Transistor, MOSET, Fuse, Coil, Led, Switch etc.

  • Soldering and De-soldering Practice.

  • Revision and Exams.

MODULE : III

SMPS LCD LED REPAIRING CONCEPT

Desktop service training institute

  • SMPS repairing.

  • Lcd , inverter repairing concept.

  • Hard disk basic troubleshooting.

  • Ram basic service.

  • Dvd rom Basic service.

MODULE : IV

MOTHERBOARD: WORKING FUNCTION OF DIFFERENT CHIP AND MAIN SIGNAL TRACING:

Desktop computer training

  • Basic computer & Block diagrams of computer motherboards, frame structure,

  • Basic working detail of computer motherboards, power on signals,

  • SMPS basic working and different volt , pson, pgood, sus, 12v, 5v, 3.3v vrm,

  • MOSFETS & coil used, switching and linear output,

  • Testing & understand vrm section offline and online with multimeter & cro,

  • Understand Power on sequence of computer motherboard (K8V-MX),

  • Clock generator chip, Clock crystal, different frequency , voltage x1, x2,

  • Types of CPU socket and CPU, main signals of CPU( vid, vcccore, shdn, vron),

  • North bridge working concept, main signals, different power,

  • South bridge working concept, main signals, different power,

  • LAN and audio chip, main signals, connection with socket,

  • I/O controller working concept, main signals, different power,

  • PCI express /mini pci AGP slot, Testing signals on pci agp slots.

MODULE : V

MOTHERBOARD: FAULT FINDING:

Desktop training institute

  • Common fault chart and solution steps of computer motherboard,

  • Repairing steps of motherboard identify problems,

  • Debug card details, use of Debug card ,common error code,

  • Testing with multi-meter, CRO different signals of motherboard,

  • Slot tester and use details, cpu, ram, pci, agp,

  • Reset signals detail , testing reset signals,

  • Bios update.

MODULE : VI

MOTHERBOARD: BGA REPAIRING AND REBALLING:

Desktop training institute

  • Washing, Cleaning, drying, Dry solder problem solution of motherboard,

  • Introduction to BGA machines, used, temperature setting,

  • ICs rebelling, BGA ball arrangement, practice., Using BGA machine,

  • Removing and inserting different chips practice,

  • Removing & replacing sockets, CPU, RAM, PS2, COM ETC,

  • Removing & replacing sockets, CPU, RAM, PS2, COM ETC,